These are pictures of my (new!) Monarch 10EE lathe purchased July 2005.  There are 
photos of testing the lathe and moving the lathe.

Test Results
-	Indicated tailstock spindle .001” drop
-	Indicated flat tailstock way with carriage .001” drop over the bed.
-	Pulled up on test bar to check spindle play.  Indicator needle just perceptibly 
moved.  Estimate .0002” deflection.
-	Cut test bar 1” aluminum rod.  Detected .0005” taper in 4”.  Machine cut a mirror 
finish on the test bar.
-	Spindle acceleration & deceleration impressive.
-	No strange noises in any speeds or feeds

Machine issues
-	High backlash in compound screw .050”
-	Taper attach bed clamp missing
-	Backgear sightglass empty

Moving
-	Used Chevrolet Trailblazer & UHaul “RO” 6x12 all-steel open trailer
-	Drove in trans position “3” instead of “D”
-	Loaded machine on 4x6 timbers & ½” carriage thru-bolts
-	2 ton gantry hoist used for unload into my shop.


Matt Isserstedt
mattofvinings@aol.com