More photos of the conversion of the 81 PuP to a Flatbed

Flatbed_davit Mt shows a length of 4" squarte tube with
a bracked welded to it and a section of 1/4" thick plate
with a 2" hole bored to accept the davit pole.

Flatbed First board initial installation of the center
deck board bolted to the ribs with SS screws. Ribs are 16" on center

Flatbed Fuel cap is a bracket holdinbg the original fuel
fillercap in place. Made from 3/16" plate

Flatbed RearGrill shows install of the expanded metal sheet
welded to a 2" square tube frame.

Flatbed reargrill_close Detail of the same

Flatbed Right Profile says it all

Flatbed Davit Mount inner shows parts of the davit support
and the pole that will fin inside.

Eric H

hmshot at the mail of hot