Here is a very clean later model Hendey 12x30 (actual 
swing more like 14” plus) Tool room lathe with very 
rare hard ways in near perfect condition,  plus the 
rare 18 speed (19-1000rpm) headstock, and D1-5 spindle, 
1.5” hole.  Bearings and runout on spindle are perfect, 
gears in headstock are very very nice and robust. All is 
tight and good, no tooling except a beat up 3 jaw chuck 
it does not have a taper attachment, but had one at one 
time as the cross-slide is that style. There are problems 
with the pick-off gears on the quadrant, but easily fixed 
by a competent machinist/mechanic. I will offer it first 
as is, and, if no takers soon, will fix it properly and 
raise the price accordingly, The price as it sits is $2000. 
Of course we can run it under power, and, knowing me, I will 
tear intothe quadrant gear problem right away……….So, ask 
questions if interested: 

efficientvelo@aol.com
Brett Flemming Vancouver, WA  360-896-6462