FILENAMES:

DoAllWelder.txt

DESCRIPTION:

This is an image scan of the schematic of bandsaw blade welder. 
Posted by Rich Dean <cmsteam@avana.net>.  Rich provided the 
following description:

=================================================================

DoAll BANDSAW WELDER Schematic (see DoAllWelder.gif)

Here is the wiring diagram for the DoAll Model DBW-1A welder. I acquired
 an old unit (sans bandsaw) and recently rebuilt it after seeing a request
 for a diagram on r.c.m. The DoAllWelder.gif shows all known specs as I
 found them. This is a 220 Volt welder and grinder (including the lamp).
 Switch S3 is not as original on mine as this was lost. I show a good
 way to control the grinder/lamp using a DPDT center off toggle switch.
 Rich Dean 30 Jan '99