FILENAMES:

cg1.jpg
cg2.jpg
cg3.jpg
cg4.jpg
cg5.jpg


DESCRIPTION:

These are photos of work by Chuck McGhee done on a Shoptask machine.
Posted by John Taylor Mark <3in1MAN@compuserve.com>. John provided 
the following description:

=================================================================


In the thread 'import v domestic" i suggested people should post photos of
their projects rather than arguing over which machine was best- There was
very little response, indicating that many of the most vociferous have
little real work to show. Therefore the following are some photos of work
done by Chuck McGhee, a retired Boeing machinist.  He is using his shoptask
machines. Photos are of Chuck's 1/4 scale donovan drag race engine. Will be 
fully functional when done with a blower, hemi heads etc. block, crank,
manifolds, heads, pan all machined from billet pieces. rods are split with
half shell babbit bearings. valves, springs, keepers all done by Chuck from
his own design- not a kit .  Other pictures are of cnc machine producing
parts for a client.  Amazing quality work.