FILENAMES:

DRO_1.jpg
DRO_2.jpg
DRO_3.jpg
DRO_4.jpg
DRO_5.jpg
DRO_1.zip


DESCRIPTION:

These are pictures showing use of a digital caliper as a
DRO for the quill of a mill/drill. Posted by Tom De Winter
<AcroII@aol.com>. Tom provided the following description:

=================================================================

Five Pictures show my installation of an inexpensive ($80) DRO 
on an Enco mill-drill.

DRO 1:	Drilled & tapped casting for S.S. standoff in lower 
        left corner.
DRO 2:	Actuating bracket, S.S., tig welded. Lower part mounts 
        to spindle clamp.
	Top mounts to DRO.
DRO 3:	Finished installation
DRO 4:	Bracket mounts to spindle clamp, drilled & tapped for  
        two 6-32 screws.
DRO 5:	Shows bracket mounting on DRO

DRO.zip contains all the pics.

High resolution pics e-mailed on request.  Questions welcome.  
acroii@aol.com
Regards,  Tom De Winter