FILENAMES: DndraftA.txt DndraftB.JPG DndraftC.JPG DndraftD.JPG DESCRIPTION: These are pictures of a welding table with built in fume collector. Posted by Matt Maguire . Matt provided the following description: ----------------------------------------------------------------------- Files Contained, DndraftA.txt - this file DndraftB.JPG - view of table, showing fan motor placement DndraftC.JPG - better view of table top, controls, fan motor, filter box. DndraftD.JPG - view from back of table, showing filter box and fan exhaust (down low in the middle). I built this table in May of 99 and really wished that I had done it much sooner. The table dimensions are 36"W x 24"D x 32"H (I now wish that it were 48"W x 36"D, "OH WELL"). The sliding plates on the top as well as the sides are from 1/4" x 6" plate, the 5 top plates have 3 ribs (1/4" x 1") welded to the underside for stiffness and to keep them from falling into the table. The frame is from 1 1/2" x 1/4" angle, the table bottom is 11Ga as is the filter box. The filter box is baffled and contains 4 pleated filters, the pressure fan is a home built 1/2hp. As with almost everything else in my very small shop IT'S ON WHEELS! Matt Maguire