FILENAMES:

dfcnclathe.jpg

DESCRIPTION:

This is a picture of a cnc lathe adaptation. Posted by Dan Falck 
<dfalck@sprynet.com>. Dan provided the following description:

========================================================================

Here's a picture of a little cnc lathe attachment that I made for my 9"
Southbend, using a Sherline mill base.  I took the mill apart and put it in
my larger milling machine and then cut two slots in the bottom of the base.

These slots correspond to the v ways on the lathe bed.  After that, I
installed some stepper motors on the X and Y axis'.  I haven't done much 
with it yet, but I thought some people might get a kick out of seeing it.

Thanks,
Dan