FILENAMES:

stand.jpg

DESCRIPTION:

This is a picture of tool stand for shop power tools. 
Posted by Jason North <jasonrnorth@bigfoot.com>. Jason 
provided the following description:

=================================================================

This is a detail of the tool stand I made for mounting 3 different 
shop tools. These are: Delta bandsaw, 7" compound mitre saw, and 
4x36 belt sander. 

The stand is an old work tray stand, but any cheap grinder pedestal 
would work fine. I mounted a 1/2" plywood top, and drew the base 
outline of the tools onto it. I drilled the mounting hole locations, 
and installed 1/4-20 blind nuts from the bottom. They are flush with 
the top surface.

Now, all I need to do to mount a tool is set it in place, match the 
base outline, and drop the mounting screws into place.

JR