FILENAMES:

Water_tig_1.jpg
Water_TIG_2.jpg

DESCRIPTION:

This a diagram and a photo of an adapter for connecting a water
cooled TIG torch to a welder. Posted by Ernie Leimkuhler 
<ernie@stagesmith.com>. Ernie provided the following description:
=================================================================

Here is an attached image of the setup.
You can get the funny camlock fitting from whoever sold you the machine.
They cost about $30.
Pull off the outer plastic cover to get to the brass.

You could steal the one off of your existing air-cooled torch, but I 
prefer to keep the air cooled torch as a backup.
Gas and water fitting have the same thread, but water is a left hand 
thread while gas is a right hand thread.

I had my setup on my Econotig for 4 years, and it worked great.
You can either use a legitimate TIG water cooler, build your own 
water cooler with a pump and bucket, or just use your shop sink, like 
I do.


Let me know if this comes through.