FILENAMES:

kenmill1.JPG
kenmill2.JPG

DESCRIPTION:

These are pictures of a milling machine with three phase converter.
Posted by Kenneth W. Sterling <kws@usaor.net>. Kenneth provided 
the following description:

=================================================================

These 2 files show both sides of my
"new to the 50's decade / new to me"
Bridgeport Vertical Mill.
Filenames are kenmill1.jpg which shows the
right frontal view showing the three-phase
converter stop/start button box on the wall
behind the mill (just above the view of the
power feed on the table).  Looking closely
at the wall directly behind the mill you can
see the converter electronics in an old
fusepanel box which measures 12 x 20 inches.
Directly behind the mill, sitting on a rubber
pad is the 5 HP 3ph idler motor.
The Rotary table is also a new purchase, although
I had to settle for an import as I'm just starting
out, but to compensate, I did buy a Clausing
Milling vise. (Not yet arrived)
The file kenmill2.jpg is a picture of the
left frontal view.  Outlet on wall powers the
table feed and the worklight (which came with the
mill).
Knee handle intentionally turned around.
I will enjoy.... :)    Ken.