FILENAMES: toolpost0002.jpg DESCRIPTION: These are pictures of home made lathe toolpost. Posted by James Glass . The following description was provided: ================================================================= Here is a quick change tool post most anyone could make. The tool holders can be purchased or made if you have a dovetail cutter. Nothing critical about this, and I'm amazed how well it works. I figured a cam lock system would be to involved so 1/4-20 screws pull the keyed dovetail back, clamping it in place. I thought about a crank for the screws, but so far use an allen wrench. Submitted by Jim Glass Genoa, Il