FILENAMES: 10EEschematic.gif 10EEMonarchElec-1.gif 10EEMonarchElec-2.gif 10EEMonarchElec-3.gif DESCRIPTION: This a scan of the schematic of a speed control for a Monarch 10EE lathe and related manual pages. Posted by Art Volz . The following description was provided: ================================================================= This is the electrical schematic for a c. 1956 Monarch 10ee that was provided to me by Gary Hart. A group of 10ee afficionados is asttempting to devise a modern and cheap replacement fix for the very expensive to replace Thyratron tubes that the Monarch used. Replacement tubes cost in the neighborhood of $500 and up. SCR's, with which a fix is hoped possible, are MUCH cheaper. Those who desire to participate in this forum see "Monarch Lathes" at: http://www.practicalmachinist.com Art Volz volzmechatronic@yahoo.com ----- added later ----- These are 3 additional pages from a c. 1956 Monarch 10ee manual with adjustments, trouble-shooting procedures, and a parts list for this lathe's electrical control system. These were also provided by Gary Hart. They complement the files posted on 3 April 2002 entitled "10eeSchematic"