FILENAMES:

Ingersoll-shop-1-hexapod-mill.jpg
Ingersoll-shop-2-hexapod-mill.jpg
Ingersoll-shop-3-horizontal-openside.jpg
Ingersoll-shop-4_5-meter-mill.jpg
Ingersoll-shop-5-machine-shop-floor.jpg
Ingersoll-shop-6-3-meter-mill.jpg
Ingersoll-shop-7-3-meter-mill2.jpg
Ingersoll-shop-8-small-mill.jpg
Ingersoll-shop-9-1890-horiz-mill2.jpg
Ingersoll-shop-10-1890-horiz-mill.jpg
Ingersoll-shop-11-1890-replaceable-insert-cutter.jpg
Ingersoll-shop-12-planer-mill-with-mag-chuck.jpg

DESCRIPTION:

These are pictures of the shop and machines at Ingersoll Milling
Machine Company.
 
Posted by John R. Henriksen <jih@Ingersoll.com>. 

The following description was provided:

=================================================================
<webmaster note - these files were discussed on the Chaski metalworking board.>

<webmaster note - Files were renamed, resampled and brightened
 to enhance usage in the dropbox. Text below edited to sync #'s>

A walk through the shop 4-25-02    Ingersoll Milling Machine Co.

1.     Hexapod actuator arms and spindle carrier
2.     Hexapod machine outside
3.     Horizontal Openside in assembly
4.     4.5 meter mill 
5.     machine shop looking down the aisle
6.     3 meter mill cutting a generator rotor
7.     3 meter mill cutting a generator rotor
8.     Small mill 
9.     1890 horizontal mill
10.    1890 horizontal mill
11.    1890 replaceable insert mill cutter
12.    small Ingersoll  with magnetic chuck used for roughing out ways