FILENAMES:

WC_Shear.jpg
WC_AngleNotcher.jpg
WC_AngleShear.jpg
WC_AngleBender.jpg
WC_Table.jpg

DESCRIPTION:

These are pictures of multiple fabrication tools mounted on one table. 

Posted by Wayne Cook <waynec@pan-tex.net>. 

The following description was provided:

=================================================================

  These are some shots of the tools on the
metal working table I bought at closing auction
of my former employer. They are all mounted so 
that they don't interfere with each other (at
least not much).

  WC_AngleNotcher is a shot of
the angle iron notcher. As you can see on the
frame it's rated at 2"x2"x1/4" angle. Very handy
for making corners in angle iron. :-)

  WC_AngleBender is the bender that's used after
notching the angle iron. 

  WC_AngleShear is the angle iron shear. I think it
can handle up to the same 2x2x1/4" angle as the 
notcher but I'm not sure about that. 

  WC_Shear is the plate shear on the table. It's a
big one with 10-12" long blades. I don't know the
capacity but it'll handle fairly thick pieces. All
I know is that it's a Pexto with the numbers 296 and
58-2 on the tag.

  WC_Table is a wide angle shot showing how they all
fit on the table.