FILENAMES:

blade_welding_clamp.jpg

DESCRIPTION:

This is a drawing of a bandsaw blade welding jig. 

Posted by Ernie Leimkuhler <ernie@stagesmith.com>.  

The following description was provided:

=================================================================


This is a drawing of my bandsaw blade welding clamp.
It holds both ends aligned, and gives ample room to 
get in with a TIG torch.

The mounting tab gets clamped to the edge of a table 
so the bandsaw blade can loop freely.

The set screws are there to adjust for the thickness of 
the blade to ensure proper clamping pressure.

I used little 3" vise-grip C-clamps for mine.