FILENAMES:

Complete.jpg
CompleteDims.jpg
CompleteBearings&Spacers.jpg

DESCRIPTION:

These are pictures of a Monarch 10EE lathe spindle and bearings.

Posted by Mike M Fendley <mikejanf@juno.com>.  

The following description was provided:

=================================================================


This is a complete Monarch 10EE spindle at auction on ebay.

<later Mike added>

There are 3 ball bearings with this spindle.  The first 
two are ND #20212 - one is flanged and has 32xx on the 
outer race. The other is not flanged and has 12xx on the 
outer race. These 2 are nearest the chuck end of the 
spindle. The back end of the spindle has bearing ND #5210 
and has 12xx on the outer race.  There are also 3 spacers 
and a locking ring involved with the first 2 bearings.  
All these are included in the auction. I neglected to put 
this info on earlier.  Go to the following two sites for 
additional pix.

http://images.prosperpoint.com/images/2268/114405-59.jpg
http://images.prosperpoint.com/images/2268/114405-58.jpg
http://www.metalworking.com/dropbox/CompleteDims.jpg