FILENAMES: blast1.JPG blast2.JPG blast3.JPG blast4.JPG blast5.JPG blast6.JPG blast7.JPG DESCRIPTION: These are pictures of a shop built "sand" blasting cabinet. Posted by Dan K. . The following description was provided: ================================================================= Blast 1-7 are photos of a blast cabinet I built. I generaly used plans from tp tools, with modifications. I made the front glass window so that it hinges down for cleaning and for ease of replacement of inner mylar protector. I made an aluminum frame for the glass, out of "h" profile aluminum extrusion. I wedged the glass into the channel with rubber gasket material. For the bottom of the funnel, I used a "blast gate", which is normally used with central vac systems for woodworking. I ordered the blast gun, siphon tube, glass, gloves from tp tools. I had scrap lumber for the frame, and some scrap casters.. I find this cabinet to work very well.. I use a 3hp 30 gallon tank. The compressor cycles quite frequently, but I am not doing production with it.