FILENAMES:

esab_foot_pedal.jpg
esab_foot_pedal-2.jpg

DESCRIPTION:

These are pictures of shop built current control pedal
for a welder.

Posted by Kryptoknight <kryptoknight@att.net>. 

The following description was provided:

=================================================================

the pics have annotations on them.

i used cat5e cable and connectors to attach my pedal to my 
amphenol connector. i have a torch switch also tied in, so 
without pedal i get 100% amps using torch switch. i then 
plug in the cat5 end and i can switch on from either torch 
or pedal, but amps are controlled by pedal.