CHAMPION 20-INCH BACK-GEARED UPRIGHT POWER DRILL WITH LEVER, WHEEL, POWER FEED AND AUTOMATIC STOP

An Exclusive Machine Shop Power Drill

The Champion 20-inch Upright Power Drill is the most thoroughly modern and up-to-date power Drill manufactured, combining all the good features that a machine of its kind ought to have; in every respect equal and in many respects superior to any Drill of its size on the market.  It combines simplicity and speed in operation with strength and rigidity and drills with perfect accuracy holes up to 1 1/2 inches.  It is a strictly high-grade Power Drill with the very best material and workmanship represented in its entire construction. 

All Gears are machine cut.  The Crown Gear runs on a high-grade end thrust Ball Bearing which not only allows this gear to operate with less friction but also avoids the usual wear on babbitted bearings which eventually causes this gear to incorrectly mesh with the pinion.  Radially the crown gear runs in a phosphor-bronze bushing, which likewise insures longer life to the wearing qualities of this important gear.  The Bevel Gears are all planed, guaranteeing a perfectly smooth and noiseless running drill.  The Bearings are large and powerful.  The upper shaft has split bearings to take up the customary wear and tear.  The change from plain to Back-Geared Drill is done in an instant by simply sliding the gears.

The Champion 20-inch Back-Geared Upright Power Drill has eight speeds with three (3) distinct and complete feeds - Power-, Wheel-, and Lever-Feed.

It is supplied with all the graduated and automatic features found on drills costing ten times the amount.  The spindle and sleeve are ground and counter-balanced by a weight in the hollow column.

This Drill has screw for raising and lowering the table, which is very convenient and quick in action with table firmly remaining where it is stopped.  It is the most accurate and best finished Power Drill that human hands can manufacture.

SPECIFICATIONS


Height of drill, 75 inches.

Distance between table and spindle, 27 inches.

Distance between spindle and base, 42 3/4 inches.

Diameter of crown gear, 5 1/4 inches.

Diameter of pinion gear, 3 1/4 inches.
	
Diameter of column, 5 1/4 inches.
	
Traverse of table on column, 21 inches.
	
Eight Spindle Speeds - 442, 251, 158, 87, 79, 45, 28, 15 R.P.M.	

Diameter of table, 16 inches.

Diameter of spindle, 1 3/4 inches.

Traverse of spindle, 9 inches.

Size of cone pulleys (4-step)  4, 5 3/4, 7 1/2, 9 x 2 - in. face. 

Floor space required, 16 x 46 in.

Horsepower required, 1.

20" Electric V-Belt Drive Drill with 1 H.P. Motor, current and voltage as ordered, Weight 1104 lbs.  Code:  Fledgeart.

Can be furnished less Motor with 2 V-Belts and double V Motor Pulley, any bore to suit your Motor.

Can be furnished Electric Gear Driven if preferred to V-Belt Drive.  Weight 1104 lbs.  Code:  Finirica

20" Back-geared Belt Driven Drill with tight and loose pulleys 8" x 20" to run at 300 R.P.M. as illustrated.  Weight 860 lbs.  Code Feidhar.