These picture are from a recent job that we took on, machining 
weldments of Web Casting ink fountains. 

We were required to machine the ends of these castings with a 
right angle head. We needed to beef up the spindle attaching 
method to increase rigidity. We made a steel sleeve to clamp 
around the Volstro Right angle head, and the machine spindle. 
It works great.

The Right angle head is made for light machining only. I wouldn't 
do any real aggressive cuts with it, but with the sleeve we were 
able to do much more.

K. Barratt
Perretta Graphics Corp.