Well...I went and picked it up.

The front of the machine, over the connectors for the various torchs says...

Cyber-tig 500 DCS

A sticker on the machine gives the volts, 230/460, 3 phase 105/56 amps

It also says is a model CT-500-DC-S
Serial #88WS20502

A silkscreened area says its the Mod 300/500  with the numbers 369542B-6

It appears to be a DC only unit, but it has a section that has some sort
of HIGH FREQUENCY adjustment pot and an auto/off switch

With the machine was a red box on top...a Thermal Dynamics Mod WC100

Included a foot pedal, most of a Cobra Prince XL spool gun 
(missing the tip, but filled with aluminum wire....???

a torch that looks something like a tig torch, but has an orfice and
based on my research, looks to be a Plasma Torch.
This was attached to the red box, which had a control line to the foot pedal 
and one to the welder. Nothing was attached to the output lugs of the welder itself, 
though I have a big wad of cables with lugs on the end.

The torch was connected with 4 hoses, plasma, sheild, positive, negative. 
There doesnt appear to be any electical connection. Wierd.


Also a BIG Tweeco Mig gun, but the quick connector on the end doesnt match anything on the machine.

Any info would be greatly appreciated.

gunner@lightspeed.net