SCMI TOP 35spindle 32mm drilling machine.  Used for doweling, and 
screw holes if desired, & other assembly holesfor cabinet case work.  
Will also line drill for shelf pins.  Getting head parallel to table 
so drills are parallel to work faces.   Then making fences, end stops,  
and  references square or parallel and aligned as necessary.   
Machine will drill at any angle from 90 (into face of piece) to 0/flat 
for end drilling.  Angles in between (say 30) are for doweling mitered 
pieces for multisided boxes, or for assemblies that are designed to be 
non-square.