This is a double spindle woodworking shaper made by "Advance" of Van 
Wert, OH.  All self aligning bearings (twin row spherical) with oil
pumps in each ssump to flow oil to the top spindle bearings where it
trickles through, and then down through another external pipe and 
through the top of the lower bearings (radial and thrust in the bottom)
Unusual feature is the pair of flywheels driving cone clutches on each 
spindle.  Photos taken during replacement of flywheel self aligning ball 
bearings (grease lubed).  1-1/8" dia spindles.