The whole table is 24 X 48 X 36 high.

I used 1.5" angle for the top frame,

1.25 X 1/4 flat for the removable slats, Pieces of 1.25 X1/4 welded in place 
for the slats to sit in.

1.5 sq tubing for the legs and cross supports on the bottom,

The table top is 24 X 36" 1/4 plate.. means the slated area is 24 x 12". ish

Wheels on one end and adjustable 1/2 bolts to stabilize the table on the 
other end,

The nuts are welded to a piece of 1/4 that is welded to the bottom of the 
legs the nuts are on the inside.