Needed a temporary lathe to turn porch columns.  Wooden columns, with 1-1/2" 
sched. 80 pipe epoxied in the middle.  Lathe will be used to sand the pipes, 
then wet-sand with epoxy as part of lamination process.   
Columns will then be milled on the lathe with a router, using a hardinge 
dividing head set up in place of the tailstock (not shown).  Temporary lathe 
is made using headstock & tailstock from a Hardinge Cataract "split bed" 
metal lathe.  Adapted by making steel split bed style riser blocks shown, 
to match parts to top of existing clamp carrier beam.  (W-4 steel beam)